Company News Published:2026-05-11

Precision Cooling Vessel: 316L 20×1.0 Liquid-Cooled Welded Stainless Tube

For data centers, energy-storage stations and other critical scenes, Zhaori builds the 316L 20×1.0 liquid-cooled welded stainless tube. The molybdenum-bearing low-carbon 316L resists chloride corrosion; the 20 mm OD and 1.0 mm wall are precision-sized, with inner roughness Ra≤0.5 μm, rated -196℃ to 450℃, and compression, push-in, VCR and welded connections. It suits CDU coolant distribution, storage-battery cooling and semiconductor equipment cooling, with full size and material customization.

Precision Cooling Vessel: 316L 20×1.0 Liquid-Cooled Welded Stainless Tube

With the boom in computing power, NEV expansion and high-end equipment upgrades, efficient cooling has become a core need. In liquid-cooling systems, the coolant-carrying “vessel”—the liquid-cooled tube—directly decides system stability and service life.

Focusing on high-end precision stainless tube R&D and production, Zhaori has built the 316L 20×1.0 liquid-cooled welded stainless tube for data centers, energy-storage stations and other critical scenes, with corrosion resistance, cleanliness, pressure capacity and precision as its core strengths, making it a preferred solution for critical cooling loops.

Core Choice: 316L Material and 20×1.0 Size, Precision-Matched to Critical Conditions

Known as the “gold material” for liquid cooling, the molybdenum-bearing low-carbon 316L design gives the tube outstanding chloride-corrosion resistance, eliminating intergranular corrosion risk. It fits fluorinated fluid, deionized water, ethylene glycol and other coolants, and runs stably even in coastal high-chloride environments. The precision 20 mm OD and 1.0 mm wall balance performance and adaptability:

✔ Pressure fit: well matched to medium- and low-pressure liquid-cooling systems; 1.5× pressure test shows no deformation or leakage for safer running.

✔ Flexible installation: lightweight design with excellent welding and bending performance fits 1D bending, flaring and other processing, integrating easily into complex tubing layouts.

✔ Focused scenes: designed for CDU coolant distribution in data centers, storage battery-pack cooling loops and semiconductor equipment cooling, keeping critical equipment stable long term.

Craft Manufacturing: Four Core Performances Safeguard Quality

High-Clean Inner Wall, No System Contamination

Using internal weld reshaping and precision inner-wall polishing, inner roughness is Ra≤0.5 μm with no weld bead residue, oil, rust or impurity release. It avoids coolant contamination and cold-plate blockage, protecting servers, storage batteries and other precision equipment and fully meeting high-cleanliness liquid-cooling requirements.

Wide-Temperature Pressure Capacity for Complex Conditions

The temperature range covers -196℃ to 450℃, serving both cryogenic and high-temperature running. One-piece dual-TIG arc welding gives flat, defect-free welds with strong vibration and fatigue resistance, eliminating long-run cracking and fitting high-frequency equipment operation.

Clean Processing Extends System Life

Clean processing throughout leaves no residue or corrosion risk, and service life far exceeds plastic and rubber tubes, greatly cutting later maintenance cost and downtime losses.

Multiple Connections for Every Scene

Compression, push-in, VCR, argon-arc welding, flange and other connections are supported; no complex adaptation is needed to connect to existing liquid-cooling systems for faster installation.

Core Applications: Precision Support for Three Scenes

Data-center liquid cooling: CDU coolant distribution, rack branches and server cold-plate loops; efficient heat exchange helps lower PUE and keeps computing equipment stable.

New-energy storage: lithium battery-pack cold plates and storage-station cooling loops, with precise temperature control to avoid thermal runaway and extend battery life.

High-end industrial manufacturing: semiconductor equipment and precision-instrument cooling loops, fitting high-cleanliness, low-contamination, corrosion-resistant conditions and safeguarding machining precision.

Flexible Customization Covering Every Scene

Beyond the core 316L 20×1.0 liquid-cooled welded tube, Zhaori supports full-size, full-material customization:

Materials: 304 stainless steel (cost-effective, for standard coolants) and 2205 duplex stainless steel (high strength and high corrosion resistance, for extreme conditions).

Sizes: OD 6–219 mm, wall 0.5–3.0 mm, adjustable to actual conditions.

Processing: special lengths and curvatures, 1D bending, flared tubes, flanges and other personalized processing for complex installation needs.

Choose Zhaori for a Reliable Cooling Vessel in Critical Scenes

Liquid-cooling stability starts with a quality tube. The Zhaori 316L 20×1.0 liquid-cooled welded stainless tube brings strong material corrosion resistance, precision craftsmanship, flexible installation and long life, and is a trusted choice for critical cooling loops in data centers, new energy and high-end industry.

Hotline: 0536-3356888

Back to News List Contact Us