Company News Published:2026-05-02

304 89×1.5 Thin-Wall Stainless Bend: Precision Cold Bending, No Deformation or Wrinkling

Zhaori's 89×1.5 thin-wall stainless 90° bend uses mature precision cold bending without heating or secondary damage, with a minimum 1D bend radius. It stays free of deformation, wrinkling and scratches, with even wall thickness and smooth, burr-free inner and outer walls, fully retaining corrosion and high/low-temperature resistance. It fits heavy/light trucks, internal combustion engines, food and beverage, pharma purification, chemical corrosion protection, HVAC circulation and environmental equipment, with 30°/45°/180° and 1D small-radius non-standard customization.

304 89×1.5 Thin-Wall Stainless Bend: Precision Cold Bending, No Deformation or Wrinkling

No Deformation, No Wrinkling, No Scratches, Custom-Made, Batch Delivery

In pipe processing, cold bending of thin-wall stainless tubing often causes headaches: the wall thins, scratches and wrinkles; dimensions are off; sealing and fluid resistance suffer; pipe life is affected; rework, material waste and schedule delays become routine.

No need to worry. Here is our 89×1.5 thin-wall stainless 90° bend, built on mature cold-bending craft to fit pipe systems across many industries.

Why Choose This Bend?

Unlike rough common processing, we have deepened cold-bending craft for years. The whole process uses precision cold forming without heating or secondary damage, achieving a minimum 1D bend radius. With strong processing capability, thin-wall bending problems are solved at the source, and every piece stands up to inspection.

No Deformation, No Wrinkling, No Scratches

Custom dies plus precision cold bending:

no stretching on the outer side, no wrinkles on the inner side, no scratches on the wall;

smooth, regular arc with high installation fit.

Even Wall, Smoother Flow

The standard 89×1.5 size keeps even wall thickness after bending;

smooth, burr-free inner and outer walls lower fluid resistance,

meeting hygienic conveying requirements for food, pharma and more.

Corrosion Resistant and Strong, Long-Lasting

Cold bending does not damage the original stainless properties;

corrosion resistance, high/low-temperature resistance and structural strength are fully retained,

and the bend runs stably long term in heavy/light trucks, internal combustion engines, chemicals, HVAC, environmental equipment and other complex conditions.

Universal Across Scenes, Customization Supported

Wide applications:

heavy/light trucks, internal combustion engines, food and beverage, pharma purification, chemical corrosion protection, HVAC circulation, environmental equipment and more.

Beyond the standard 90° bend, we customize to order:

any angle such as 30°/45°/180°, including 1D small-radius non-standard bends, machined to drawings with precise dimensions to meet project installation needs.

Professional Cold Bending, Reliable and Worry-Free

From raw material selection and process control to finished-product inspection, the whole flow is strictly managed. The 1D small-radius bending craft is mature, with stable delivery and good cost performance, eliminating rework loss and solving thin-wall stainless bending needs in one stop.

For thin-wall tube cold bending, craft decides quality.

Professional cold bending, stable quality and customization:

the 89×1.5 thin-wall stainless bend is a preferred choice for industrial piping.

For inquiries, samples or non-standard customization,

Back to News List Contact Us